Alphabetical Outline of Testing Available for Grease

All testing is done to the most current revision of the method
unless otherwise requested by the customer.

Click on test method number for information about each test.
These brief descriptions are intended as an aid for test selection only.

ISO-DIN-ASTM Cross Reference Chart

DESCRIPTION
METHOD
SAMPLE 
REQ'D
PRICE 
US $
AAR M-914 ASTM D-1092 Apparent Viscosity - per Temperature AAR M-914 ¶ 2.3.1
500 g
184.00
AAR M-914 Freezing Point AAR M-914 ¶ 2.3.2
 50 g
40.00
AAR M-914 Materials AAR M-974 ¶ 2.1  
105.00
AAR M-914 Oil Separation AAR M-914 ¶ 2.4.1
 50 g
97.00
AAR M-914 Oil Swell AAR M-914 ¶ 2.6
 200 g
154.00
AAR 942 Roll Stability, 96 hrs. @ 180°F  AAR 942
100 g
373.00
AAR M-914 Spreadability AAR M-914 ¶ 2.3.3
 100 g
40.00
AAR M-914 Water Stability AAR M-914 ¶ 2.7.1  
143.00
Acid Number, Strong ASTM D-664
50 g
55.00
Analysis of Grease ASTM D-128
by request
Aniline Point, Extracted Fluid ASTM D-128
100 g
193.00
Apparent Viscosity of Greases ASTM D-1092
1 lb
184.00
Ash Content ASTM D-128  
172.00
Ash Content FTM-5421  
172.00
Base Number, Total by Hydrochloric Acid Method ASTM D-4739
20 g
55.00
Bethlehem Steel Combo Test Parts A & B LT-46
1 lb
319.00
Boiling Water Immersion of Greases FTM-3463
5 g
40.00
Bomb Copper Corrosion of Greases ASTM D-1261
100 g 
99.00
Centrifuge Oil Extraction PLTL-71
100 g
57.00
Compatibility of Binary Grease Mixtures ASTM D-6185
 
by request
Compression Set ASTM D-395
500 g
338.00
Copper Strip, Lockheed Martin WS6788C PLTL-161  
107.00
Copper Corrosiveness ISO-2160
100 g
52.00
Corrosion, Copper Strip  ASTM D-4048
FTM-5309
50 g
52.00
Corrosiveness (bimetallic couple) ASTM D-6547  
52.00
Deleterious Particles in Greases ASTM D-1404
200 g
76.00
Deleterious Particles, Honda Test JISK2220
 100 g
75.00
Dielectric Constant - AC Loss Characteristics and Permittivity of Solid Electrical Insulation @ Ambient Temperature ASTM D-150
 50 g
215.00
Dielectric Constant - AC Loss Characteristics and Permittivity of Solid Electrical Insulation  Above Ambient Temperaure ASTM D-150
 50 g
259.00
Dielectric Breakdown Voltage & Dielectric Strength of Solid Electrical Insulting Materials ASTM D-149
 50 g
248.00
Dirt Count in Greases FTM-3005
50 g
51.00
Dropping Point by Aluminum Block ASTM D-2265
5 g
57.00
Dropping Point by Fluid Bath ASTM D-566
5 g
109.00
DSC (Differential Scanning Calorimetry) CEC L-85-T-99
276.00
DSC Thermogram PLTL-108
1 g
201.00
Elastomer Compatibility NBR-L & CR Type ASTM D-4289
400 g
212.00
Elastomer Compatibility NBR-L or CR Type ASTM D-4289
 200 g
109.00
EMCOR Rust Test - per bearing IP-220
ASTM D-6138
DIN-51802
50 g
263.00
Evaporation Loss @ 6 1/2 hrs. ASTM D-972
ASTM D-2595
FTM-350
25 ml
66.00
Evaporation Loss @ 22 hrs. ASTM D-972
ASTM D-2595
FTM-350
 25 ml
79.00
Evaporation Loss @ 72 hrs. ASTM D-972
ASTM D-2595
FTM-350
 25 ml
106.00
Evaporation Loss @ 500 hrs. ASTM D-972
ASTM D-2595
FTM-350
25 ml
207.00
Evaporation Loss Exceeding 500 hours - cost per hour ASTM D-972
ASTM D-2595
FTM-350
 
0.20
Evaporation Loss, DaimlerChrysler MS 272 PLTL-147
25 gm
66.00
Falex Pin & V Block Test Procedure A - Endurance Life Test - per Run ASTM D-2625
200 g
111.00
Falex Pin & V Block Test Procedure B - Load Carrying Capacity ASTM D-2625
200 g
107.00
Falex Pin & V Block Tooth Wear Test ASTM D-2760
200 g
111.00
Film Appearance & Film Thickness ASTM D-1400
 100  g
143.00
Fisher Body, Bleeding Test TM-52-6
100 g
52.00
Fisher Body, Caustic Cleaning Test TM-52-1
100 g
86.00
Flow Out @ High Pressure per TSK2509G-22 PLTL-138  
83.00
Fretting Wear ASTM D-4170
10 g
179.00
Fretting Wear, Low Temperature ASTM D-4170
10 g
289.00
Friction Analysis, Rolling Contact PLTL-95
20 g
190.00
FTIR - Infrared Sprectra PLTL-78
trace
51.00
Galvanic Corrosion, Salt Spray FTM-5322
600 gm
109.00
Gas Generation, Cylinder Ring on Block PLTL-159
600 gm
175.00
Gear Wear, Navy FTM-335
20 g
224.00
Gravimetric Contamination & Ash Residue by Filtration FTM-3010
100 ml
120.00
High Temperature Bearing Performance    Set-up ASTM D-3336
20 g
505.00
High Temperature Bearing Performance Per Hour Running Time ASTM D-3336  
1.00
Interfacial Tension ASTM D-971
 100 g
57.00
Iron Contamination by Magnet-Extraction PLTL-87
100 g
63.00
Kesternich Flow Pressure DIN51805  
132.00
Fretting Wear ASTM D-4170
10 g
179.00
Leakage of Wheel Bearing Grease ASTM D-4290
200 g
146.00
Life Performance of  Wheel Bearing Grease up to 120 hrs ASTM D-3527
50 g
270.00
Life Performance of  Wheel Bearing Grease exceeding 120 hrs,  per hour charge    
1.00
Lincoln Ventmeter. Room Temperature to 0°C K95400
1 lb
105.00
Lincoln Ventmeter. 0°C to -18°C K95400
1 lb
131.00
Load Wear Index (4-Ball EP) ASTM D-2596
500 g
143.00
Load Wear Index (4-Ball EP) Weld Load Only ASTM D-2596
250 g
109.00
Low Temperature Stability ASTM D-1084
 100 g
179.00
Low Temperature Torque  ASTM D-1478
10 g
132.00
Low Temperature Torque, DEF STAN 05-50 Part 62 PLTL-124
10 g
by request
Low Temperature Torque of Wheel Bearings ASTM D-4693
25 g
224.00
Low Temperature Torque, Honda Test JISK2220
10 g
132.00
Mean Hertz Load by Shell 4-Ball EP, Dow Corning Method 0225B
200 g
159.00
Mean Hertz Load by Shell 4-Ball EP FTM-6503
500 g
215.00
Microscopic Examination PLTL-58
 10 g
52.00
Mobility of Greases U.S. Steel      77°F LT-37
1 lb
74.00
Mobility of Greases U.S. Steel      0° to 60°F LT-37
1 lb
87.00
Mobility of Greases U.S. Steel      Below 0° LT-37
1 lb
99.00
Moisture by Weight ISO-760  
76.00
Molybdenum Disulfide Content - Non-Soap Greases FTM-3722
20 g
193.00
Molybdenum Disulfide Content - Soap Greases FTM-3720
20 g
166.00
Navistar Petroleum Ether Insolubles BT-36
100 g
63.00
Neutralization Number - Potnetiometric ASTM D-664
20 g
36.00
Oil Separation, General Motors GM9060P
500 g
71.00
Oil Separation, Nickel Cone PLTL-81
 100 g
71.00
Oil Separation, Wire Mesh Cone Method FTM-321
ASTM D-6184
100 g
71.00
Oil Separation, Koppers Centrifuge Method  Set-up ASTM D-4425
200 g
104.00
Oil Separation, Koppers Centrifuge Method  Per day Running Charge ASTM D-4425  
49.00
Oil Extraction by Koppers Centrifuge Method ASTM D-4425  
63.00
Oil Separation, Wire Mesh Cone Static Method @ 42 hrs. IP-121
200 g
71.00
Oil Separation, Wire Mesh Cone Static Method @ 168 hrs. IP-121
200 g
103.00
Oil Separation, Pressure Cylinder, U.S. Steel Method PLTL-84
100 g
178.00
Oil Separation, Storage 24 hrs. @ 25°C ASTM D-1742
300 g
71.00
Oil Separation, Storage 48 hrs. @ 25°C ASTM D-1742
300 g
106.00
Oil Separation, Storage 96 hrs. @ 25°C ASTM D-1742
300 g
165.00
Oil Separation IEC811-5-1
300 g
71.00
Oscillating Block on Ring LFW-1 ASTM D-2981
50 g
326.00
Oscillation Friction Wear ASTM D-3704
20 g
324.00
Oxidation Stability of Grease by PDSC ASTM D-5483
1 g
276.00
Oxidation Stability of Greases by PDSC ASTM D-6186
1 g
276.00
Oxidation Stability @ 500 hrs., Ford Method BJ113
500 g
by request
Oxidation Onset Temperature PLTL-149
5 g
193.00
Penetration, Worked, 60 Stroke ASTM D-217
1 lb
32.00
Penetration, Unworked ASTM D-217
1 lb
        32.00
Penetration, Unworked @ -40°C ASTM D-217
1 lb
74.00
Penetration, Worked Stability 10,000 Stroke ASTM D-217
1 lb
50.00
Penetration, 1/2 or 1/4 scale ASTM D-1403
100 g
32.00
Penetration, Prolonged Worked Stability, 100,000 Strokes ASTM D-217
1 lb
104.00
Penetration, Worked After Cooling API 5A2/5A3 ASTM D-217
1 lb
63.00
Penetration, Worked Stability 100,000 Stroke FTM-313
1 lb
104.00
Pressure Vessel Oxidation @ 100 hrs. - per Run ASTM D-942
50 g
99.00
Pressure Vessel Oxidation @ 500 hrs. - per Run ASTM D-942
50 g
130.00
Pressure Vessel Oxidation @ 1000 hrs. - per Run ASTM D-942
50 g
155.00
Reichert Test PLTL-156
100 g
138.00
Resistance of Grease to Fuel FTM-5414
20 g
86.00
Resistance of Grease to H2O & Ethanol FTM-5415
40 g
40.00
Roll Stability of Grease 2 hrs.@ Ambient to 100°C ASTM D-1831
100 g
123.00
Roll Stability of Grease 20 hrs.@ Ambient ASTM D-1831
100 g
139.00
Roll Stability of Grease 2 hrs.@ 100°C ASTM D-1831
100 g
123.00
Roll Stability of Grease 24 hrs.@ 180°F ASTM D-1831
100 g
161.00
Roll Stability of Grease 50 hours @ 180°F ASTM D-1831
100 g
189.00
Roll Stability of Grease 96 hours @ 180°F ASTM D-1831
100 g
224.00
Roll Stability of Grease, John Deere Method JDQ36B
200 g
224.00
Roll Stability of Grease, John Deere Method, Procedure A JDQ47A
200 g
99.00
Rubber & Elastomer Behavior DIN-53521
 500 g
292.00
Rubber Swell of "O" Rings ASTM D-1414
500 g
126.00
Rust Preventative Properties ASTM D-1743
25 g
143.00
Rust Prevention Properties in Synthetic Sea Water ASTM D-5969
25 g
178.00
Salt Spray Corrosion Test  @ 48 hrs.  ASTM B-117
FTM-4001.2
1 pt
171.00
Salt Spray Corrosion Test  @ 100 hrs. ASTM B-117
FTM-4001.2
1 pt
224.00
Salt Spray Corrosion Test  @ 300 hrs. ASTM B-117
FTM-4001.2
1 pt
325.00
Salt Spray Corrosion Test  @ 500 hrs. ASTM B-117
FTM-4001.2
1 pt
386.00
Salt Spray Corrosion Test  @ 1000 hrs. ASTM B-117
FTM-4001.2
1 pt
453.00
Salt Water Emersion, Lockheed Martin WS6788C PLTL-160
 
138.00
Soak Test @ 720 hrs. ASTM B-117
1 pt
415.00
Soxhlet Extraction of Greases PLTL-82
20 g
63.00
Specific Gravity - Grease Pycnometer PLTL-90
20 g
42.00
Specific Heat by DSC  (ASTM D-3947 has been discontinued)  ASTM E-1296
5 g
375.00
Storage Stability @ 2 months, Unworked & Worked Penetration ASTM D-217
2 lb
58.00
Storage Stability @ 4 months, Unworked & Worked Penetration ASTM D-217
2 lb
92.00
Storage Stability  6 months @ 40°C, Unworked & Worked Penetration FTM-3467
2 lbs
143.00
Sulfurous Acid Salt Spray FTM-5331
500 g
224.00
Swelling of Rubber NBR-H @ 72 hrs. FTM-3604
400 g
111.00
Swelling of Rubber NBR-H @ 168 hrs. FTM-3604
400 g
126.00
Swelling of Rubber  NBR-L @ 168 hrs. FTM-3603
500 g
126.00
Swelling of Rubber 168 hrs. @ 100°C ISO-1817
 500 g
126.00
Tackiness Cup & Bearing TSK2509G-22 PLTL-137
 
198.00
Tensile Strength of Elastomers ASTM D-638
 
by request
Thin Film Evaporation PLTL-99
10 g 
26.00
Thixotropy Index ASTM D-2196
500 g
12.00
                   Shear Thinning Index ASTM D-2196
500 g
12.00
                    Degree of Thixotropy ASTM D-2196
500 g
12.00
Timken Load Carrying Test -  per load ASTM D-2509
1 gal
126.00
US Steel Retention Test -  per Run USS-1RT
20 g
126.00
US Steel Static Heat Test PLTL-136
 
215.00
USP Brookfield Viscosity of Petrolatum USP Visc
100 g
131.00
USP Specific Gravity of Petrolatum USP 23
100 g
52.00
Vacuum Extraction of Oil from Greases PLTL-110
50 g
63.00
Viscosity of Grease @ High Temperatures ASTM D-3232
100 g
121.00
Volume Resistivity  - DC Resistance or Conductance of Insulating Materials @ Ambient Temperature ASTM D-257
 500 g
215.00
Volume Resistivity - DC Resistance or Conductance of Insulating Materials Above Ambient Temperature ASTM D-257
 500 g
259.00
Water by Distillation ASTM D-95
200 g
63.00
Water Content ASTM E-1064  
76.00
Water Spray Off of Greases ASTM D-4049
20 g
63.00
Water Washout Characteristics, 100°F or 175°F - per Run ASTM D-1264
20 g
106.00
Wear Scar by 4-Ball, Dow Corning Method 0351B
200 g
63.00
Wear Preventative Characteristics ASTM D-2266
50 g
63.00
Wear Preventative Characteristics @ 2 hours ASTM D-2266
50 g
83.00
Wear Preventative Characteristics @ 4 hours ASTM D-2266
50 g
106.00
Wear Preventative Characteristics with Coefficient of Friction ASTM D-2266
50 g
120.00
Wear Preventative Characteristics with Coefficient of Friction @ 2 hours ASTM D-2266
50 g 
140.00
Wear Preventative Characteristics with M-50 Steel ASTM D-2266
50 g
114.00
Wheel Bearing Leakage of Greases ASTM D-1263
200 g
132.00
Worked Oil Bleed by Meritor Method PLTL-133
 
187.00

ISO-DIN-ASTM Cross Reference Chart

116 Sunset Inn Road, P.O. Box 300
Lafayette, NJ  07848
Phone 973-579-3448  Fax 973-579-9447
e-mail:petrolube@nac.net