|
|
Alphabetical Outline of Other Available Testing
All testing is done to
the most current revision of the method
unless otherwise requested
by the customer.
Click on test
method number for information about each test.
These brief descriptions
are intended as an aid for test selection only.
| DESCRIPTION |
|
REQ'D |
US $ |
| Acidity in Volatile Solvents and
Chemicals Intermediates |
ASTM D-1613 |
|
45.00
|
| Biological Activity | PLTL-80 |
|
73.00
|
| Boiling Point | ASTM D-1120 |
|
68.00
|
| Brookfield Viscosity (Resin) - Please provide test temperture. | ASTM D-1824 |
|
148.00
|
| Congealing Point | ASTM D-938 |
|
50.00
|
| Corrosion of Solid Film Lubricants | ASTM D-2649 |
|
321.00
|
| Distillation Range of Volatile Organic Liquids | ASTM D-1078 |
|
113.00
|
| Electrical Conductivity of Aviation Distillate Fuels | ASTM D-2624 |
98.00
|
|
| Film Appearance & Thickness | FTM-3816 |
|
54.00
|
| Flammability of Aerosol Products ASTM D-3065 | |||
| Flame Projection | ASTM D-3065 |
89.00
|
|
| Tag-Open Cup Flash | ASTM D-3065 |
113.00
|
|
| Closed Drum Test | ASTM D-3065 |
148.00
|
|
| Flame Frojection, Canadian Ministry of Health | DO-30 |
|
398.00
|
| Fluid Resistance/Film Adhesion (Dry Film Lubricant) | ASTM D-2510 |
|
91.00
|
| Foaming Tendencies of Engine Coolants in Glassware | ASTM D-1881 |
|
71.00
|
| Freezing Point | ASTM D-1177 |
|
68.00
|
| GC Analysis of Diesel Fuel | ASTM D-3524 |
|
171.00
|
| GC Analysis of Gasoline | ASTM D-3525 |
|
171.00
|
| Glass Fiber Content by Pyrolysis | PLTL-132 |
79.00
|
|
| Glassware Corrosion of Antifreeze - per Run | ASTM D-1384 |
|
235.00
|
| Kauri Butanol Value of Hydrocarbon Solvents | ASTM D-1133 |
|
89.00
|
| Melting Point of Waxes | ASTM D-87 |
|
63.00
|
| Melting Point (Wax) | ASTM D-127 |
|
75.00
|
| Molybdenum Disulfide - Ford Method | AJ 106-2 |
|
307.00
|
| Oxidation Induction Period | ASTM D-525 |
|
148.00
|
| Oxidation Stability of Distallate Fuel Oil | ASTM D-2274 |
|
336.00
|
| Peel Resistance of Adhesives, T-Peel Test | ASTM D-1876 |
by request
|
|
| Penetration of Waxes | ASTM D-1321 |
|
45.00
|
| Penetration (used for softer unrefined waxes) | ASTM D-937 |
|
45.00
|
| pH of Aqueous Solutions with Glass Electrode | ASTM E-70 |
|
45.00
|
| pH of Engine Coolants & Antirusts (Glycol) | ASTM D-1287 |
|
45.00
|
| Reserve Alkalinity of Antifreeze | ASTM D-1121 |
|
65.00
|
| Sandwich Corrosion Test | ASTM F-1110 |
|
415.00
|
| Sled Test - Static and Kinetic Coefficients of Friction of Plastic Film | ASTM D-1894 |
130.00
|
|
| Sulfurous Acid - Salt Spray | FTM-5331 |
|
232.00
|
| Thermal Shock Sensitivity (Dry Film Lubricant) | ASTM D-2511 |
|
184.00
|
| Titer Point of Fatty Acids | ASTM D-1982 |
|
102.00
|
| Vapor Pressure, Reid | ASTM D-323 |
|
112.00
|
| Volatile Content Coatings | ASTM D-2369 |
|
75.00
|
| Molybdenum Disulfide (Analysis of Powder) FMS-1071 per MIL-C-7866 |
|
||
| Moisture by Weight per MIL-C-7866 | PLTL-18 |
|
69.00
|
| Water Solubles per MIL-C-7866 | PLTL-19 |
|
97.00
|
| Oil Content by Acetone Extraction per MIL-C-7866 | PLTL-20 |
|
154.00
|
| Total Insolubles per MIL-C-7866 | PLTL-21 |
|
109.00
|
| Molybdenum Disulfide Purity - Powders per MIL-C-7866 | FTM-3710 |
|
326.00
|
| Corrosion Resistance per MIL-C-7866 | ASTM D-2649 |
321.00
|
|
| Steel and Copper Corrosion per MIL-C-7866 | PLTL-23 |
|
86.00
|
| Fineness by Fischer Sub-Seive Sizer per MIL-C-7866 | PLTL-24 |
57.00
|
|
| Thread Compounds for Casing, Tubing & Line Pipe per API 5A2/5A3 |
|
||
| Worked Penetration | ASTM D-217 |
|
45.00
|
| Worked Penetration after Cooling to 0°F | ASTM D-217 |
|
65.00
|
| Dropping Point | ASTM D-566 |
|
113.00
|
| Evaporation 24 hrs @ 212°F | ASTM D-972 |
|
82.00
|
| Oil Separation Nickel Cone 24 hrs @ 150°F | Bul 5A2 A.3 |
79.00
|
|
| Gas Evolution | Bul 5A2 A.7 |
158.00
|
|
| Water Leaching | Bul 5A2 A.8 |
148.00
|
|
| Brushing Ability | Bul 5A2 A.4 |
113.00
|
|
| Evaporation Test | Bul 5A2 A.2 |
|
82.00
|
ISO-DIN-ASTM Cross Reference Chart
116
Sunset Inn Road, P.O. Box 300
Lafayette,
NJ 07848
Phone
973-579-3448 Fax 973-579-9447
e-mail:petrolube@nac.net
Informal verbal results given over the phone are for tentative evaluation only (i.e. to determine the need for repeat testing, resampling, etc.) and are subject to change upon final reporting.