|
|
Numerical Outline of Other Available Testing
All testing is done to
the most current revision of the method
unless otherwise requested
by the customer.
Click on test
method number for information about each test.
These brief descriptions
are intended as an aid for test selection only.
| METHOD | DESCRIPTION |
REQ'D |
US$ |
| AJ 106-2 | Molybdenum Disulfide - Ford Method |
|
297.00
|
| ASTM D-87 | Melting Point of Waxes |
|
61.00
|
| ASTM D-127 | Melting Point (microcrystalline waxes) |
|
63.00
|
| ASTM D-323 | Reid Vapor Pressure |
|
63.00
|
| ASTM D-525 | Oxidation Induction Period (Gasoline) |
|
143.00
|
| ASTM D-937 | Penetration (used for softer unrefined waxes) |
|
32.00
|
| ASTM D-938 | Congealing Point |
|
48.00
|
| ASTM D-1078 | Distillation Range of Volatile Organic Liquid |
|
109.00
|
| ASTM D-1120 | Boiling Point |
|
66.00
|
| ASTM D-1121 | Reserve Alkalinity of Antifreeze |
|
63.00
|
| ASTM D-1133 | Kauri Butanol Value of Hydrocarbon Solvents |
|
86.00
|
| ASTM D-1177 | Freezing Point |
|
66.00
|
| ASTM D-1287 | pH of Engine Coolants & Antirusts (Glycol) |
|
23.00
|
| ASTM D-1321 | Penetration of Waxes |
|
32.00
|
| ASTM D-1384 | Glassware Corrosion of Antifreeze - per Run |
|
227.00
|
| ASTM D-1613 | Acidity in Volatile Solvents & Chemical Intermediates |
|
36.00
|
| ASTM D-1824 | Brookfield Viscosity (Resin) |
|
143.00
|
| ASTM D-1876 | Peel Resistance of Adhesives (T-Peel Test) |
by request
|
|
| ASTM D-1881 | Foaming Tendencies of Engine Coolant in Glassware |
|
69.00
|
| ASTM D-1894 | Static and Kinetic Coefficients of Friction
of Plastic Film and Sheeting |
126.00
|
|
| ASTM D-1982 | Titer Point of Fatty Acids |
|
99.00
|
| ASTM D-2274 | Oxidation Stability of Distillate Fuel Oil |
|
325.00
|
| ASTM D-2369 | Volatile Content Coatings |
|
63.00
|
| ASTM D-2510 | Fluid Resistance/Film Adhesion |
|
88.00
|
| ASTM D-2511 | Thermal Shock Sensitivity (Dry Film Lubricant) |
|
178.00
|
| ASTM D-2624 | Electrical Conductivity of Aviation Distillate Fuels |
52.00
|
|
| ASTM D-2649 | Corrosion of Solid Film Lubricants |
|
310.00
|
| ASTM D-3065 | Flammability of Aerosol Products | ||
| ASTM D-3065 | Flame Projection |
86.00
|
|
| ASTM D-3065 | Tag-Open Cup Flash Point |
109.00
|
|
| ASTM D-3065 | Closed Drum Test |
143.00
|
|
| ASTM D-3524 | GC Analysis of Diesel Fuel |
|
165.00
|
| ASTM D-3525 | GC Analysis of Gasoline |
|
165.00
|
| ASTM E-70 | pH of Aqueous Solutions with Glass Electrode |
|
23.00
|
| ASTM F-1110 | Sandwich Corrosion Test |
|
401.00
|
| FTM-3816 | Film Appearance & Thickness |
|
52.00
|
| FTM-5331 | Sulfurous Acid - Salt Spray |
|
224.00
|
| PLTL-80 | Biological Activity |
|
71.00
|
| MIL-C-7866 | Molybdenum Disulfide (Analysis of Powder) FMS-1071 |
|
|
| PLTL-18 | Moisture by Weight per MIL-C-7866 |
|
50.00
|
| PLTL-19 | Water Solubles per MIL-C-7866 |
|
94.00
|
| PLTL-20 | Oil Content by Acetone Extraction per MIL-C-7866 |
|
149.00
|
| PLTL-21 | Total Insolubles per MIL-C-7866 |
|
105.00
|
| FTM-3710 | Molybdenum Disulfide Content |
|
315.00
|
| PLTL-22 | Corrosion Resistance per MIL-C-7866 |
310.00
|
|
| PLTL-23 | Steel and Copper Corrosion per MIL-C-7866 |
|
83.00
|
| PLTL-24 | Fineness by Fischer Sub-Seive Sizer per MIL-C-7866 |
|
55.00
|
| PLTL-132 | Glass Fiber Content by Pyrolysis |
63.00
|
|
| API 5A2/5A3 | Thread Compounds for Casing, Tubing & Line Pipe |
|
|
| ASTM D-217 | Worked Penetration |
|
32.00
|
| ASTM D-217 | Worked Penetration after Cooling to 0°F |
|
63.00
|
| ASTM D-566 | Dropping Point |
|
109.00
|
| ASTM D-972 | Evaporation 24 hrs. @ 212°F |
|
79.00
|
| Bul 5A2 A.3 | Oil Separation Nickel Cone 24 hrs. @ 150°F |
71.00
|
|
| Bul 5A2 A.7 | Gas Evolution |
153.00
|
|
| Bul 5A2 A.8 | Water Leaching |
143.00
|
|
| Bul 5A2 A.4 | Brushing Ability |
109.00
|
|
| Bul 5A2 A.2 | Evaporation Test |
|
79.00
|
ISO-DIN-ASTM Cross Reference Chart
116
Sunset Inn Road, P.O. Box 300
Lafayette,
NJ 07848
Phone
973-579-3448 Fax 973-579-9447
e-mail:petrolube@nac.net